-15%

Renovator “POLYTROL” 1 L

Name: Renovator "POLYTROL" 1 L
SKU: 2154
Price: 845.00 THB
Availability: InStock

฿845.00

Feature:
Give your boat hulls a quality polish that stands the test of time with MARINE POLYTROL. This renovator intended for your emerged plastic materials revives the colors and appearance of tarnished hulls which have suffered external aggression. It gives them shine, resistance and restores shine to your materials which regain their original appearance.
Revives the color and appearance of tarnished hulls. Restores shine to polished, chrome-plated metals
as well as stainless steel.
By being subjected to the attacks of bad weather, the surface of these supports and finishes end up
become dull, floury and lose their shine. Unlike traditional polishing methods
complicated and tedious, MARINE POLYTROL® restores them to their original shine in a few minutes.
Penetrating and wetting:
• Leaves no film on the surface: no risk of chipping. Acts deep in the support which
is regenerated from the inside.
Rich in resin:
• Fills all the micro-cavities of the support, waterproofs it and provides long-term protection
duration. Effective on plexiglass.
• Restores the surface layer in a lasting manner. Silicone-free.
Multifunctions:
• Eliminates traces of rust on stainless steel (use an abrasive pad).
• Restores tarnished anodized aluminum masts. Eliminates white rust.
• Revives the color and appearance of tarnished gelcoats.
Ideal for maintaining your boats.

8 in stock

SKU: 2154 Category: Lacquers, Paints & Protection

Description
Reviews (0)

Specifications:
Application
Tarnished hulls:
• Apply a layer of MARINE POLYTROL® to saturation with a soft brush to clean surface
• Leave to act for 10 to 15 minutes then remove the excess product by wiping it with a cloth
clean lint-free so that it does not form a film on the surface.
• To make the shell shine, gently polish the surface with a sheepskin or cloth.
Revive polished, chrome-plated metals:
• Apply a layer of MARINE POLYTROL® to saturation with a soft brush on the support
own. Leave to act for 10 to 15 minutes.
• Soak an abrasive pad (000 steel wool) with MARINE POLYTROL® then rub gently
support if necessary. Protect any wood underneath. Finish by wiping the support
with a dry cloth so as not to leave any product on the surface.
Eliminate rust pitting on stainless steel, white rust on aluminum:
• Soak 000 steel wool in MARINE POLYTROL® then lightly rub the support (protect
the wood that would be underneath).
• Clean the support with a clean cloth.
• On a clean surface, apply a layer of MARINE POLYTROL® to saturation using a soft brush.
Leave on for 10 to 15 minutes then wipe with a clean cloth.
Do not throw soaked paper or rags into a trash can without first leaving them
dry flat and air dry.
Allow at least 24 hours to elapse before putting into service.
Recommendations before application
Treat small areas at a time to avoid uncontrolled drying of MARINE POLYTROL® and
therefore the formation of a harmful film.
Avoid application to hot surfaces or in direct sunlight.
Work on clean, dry surfaces free of grease and silicone stains.
If cleaning is necessary, use a solvent or a water + detergent mixture on metal.
On plastic, preferably use DECK CLEANER* (NET-TROL®*). Rinse thoroughly then
leave to dry for at least 12 hours.
Hide areas that are not to be treated.
Do a test beforehand.