S3227 Outboard Marine Marine Fuel Filter Fuel Water Separator Filter Assembly Marine Engine Marine Filter

Feature:
Application: Outboard engine for Yamaha Mercury Honda speedboats Motorboats, etc.
Draining of water or replacement of elements is determined by contamination level of fuel.
Inspect the collection bowl for water daily and service as necessary.
Replace elements at least once a year or when a decrease of power is noticed.
To Drain Water:
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
To Replace elements:
1. Loosen self-venting drain plug and drain the elements into a container.
2. Remove filter elements from mounting bracket with bowl connected.
3. Remove bowl from filter elements and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new elements, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
S3227 Filter, Fuel Water Separator (10 Micron) Element Only; Replaces Racor: S3227,
Mercury Marine: 35-886638, 35-8M0103096, Honda: 17670-ZW1-801AH, Suzuki: 99105-2000
Screw on filter and water separating filters